DSO-2150 USB 7.1.0.8 can be downloaded from our website for free. The actual developer of the free program is hantek. Our antivirus check shows that this download is clean. The most popular versions of the DSO-2150 USB 7.1, 7.0 and 6.0.
Dso 2150 Driver
The program's installer files are commonly found as DSO-2150 USB.exe, DSO2150USB.exe, DSO2250USB.exe or Unwise.exe etc. The software lies within Office Tools, more precisely Document management. The latest version of DSO-2150 USB can be downloaded for PCs running Windows XP/7/8/10/11, 32-bit.
DSO-2150 USB is a portable PC-based digital oscilloscope application. DSO-2150 USB can save waveform in the following formats: text file, .jpg or .bmp graphic file, MS excel/word file. You must use a probe with more than 60MHz bandwidth to get undistorted signal.
The devices need firmware to be uploaded to them after they start up. This is a small file that is normally uploaded by the Hantek driver on Windows. The libsigrok driver does this as well, but you need to get the firmware file from the Windows driver first. To help you with this, we've made the tool sigrok-fwextract-hantek-dso, available in the sigrok-util repository.
Find the 32-bit driver installed on the Windows system (or find it on the included CD). It's typically called DSOxxxx1.sys or DsoxxxxX861.sys, where xxxx is your device's model. Use it like this:
Copy the resulting file over to the location where libsigrok expects to find its firmware files. By default this is /usr/local/share/sigrok-firmware. The libsigrok driver will find the firmware file there, and upload it to the device as needed.
We are proud to have you among our software library users, thank you for choosing us. The version of DSO-2150 USB is 7.0.0.3. The installer is available free of charge. Sadly, there's no direct link available for downloading the software, but we found the link to the developer's site, where you can download the software. This tool is not available now. We'll inform you as soon as DSO-2150 USB will be available again. We should inform you that downloading this program from an external page releases SoftDeluxe from any liability. Please check your downloads with antivirus software.
I'm working with the VI from a Hantek DSO-2150 USB oscilloscope. LabVIEW shows the data in a graph but I'd like to output the results to a CSV file. I think the "Write to measurement file" control would be of use but I'm not sure how to use it. Would someone please help a newbie? 2ff7e9595c
コメント